Title photo
frugal technology, simple living and guerrilla large-appliance repair

Regular blog here, 'microblog' there

Many of my traditional blog post live on this site, but a great majority of my social-style posts can be found on my much-busier microbloging site at updates.passthejoe.net. It's busier because my BlogPoster "microblogging" script generates short, Twitter-style posts from the Linux or Windows (or anywhere you can run Ruby with too many Gems) command line, uploads them to the web server and send them out on my Twitter and Mastodon feeds.

I used to post to this blog via scripts and Unix/Linux utilities (curl and Unison) that helped me mirror the files locally and on the server. Since this site recently moved hosts, none of that is set up. I'm just using SFTP and SSH to write posts and manage the site.

Disqus comments are not live just yet because I'm not sure about what I'm going to do for the domain on this site. I'll probably restore the old domain at first just to have some continuity, but for now I like using the "free" domain from this site's new host, NearlyFreeSpeech.net.

Mon, 27 Feb 2017

I finally replaced my HP Pavilion g6 keyboard

I had a new keyboard, and my "n" key on the old one broke again (the replacement was never as good as the original key), so I decided to pull the laptop apart and install the new keyboard.

While putting it all together, I did get one little screw wedged in a plastic hole (I'll extract that one later and replace it), but an old laptop can get along with many fewer case screws than it ships with. If you've ever had a used or otherwise repaired laptop, you know what I'm talking about.

The keyboard replacement wasn't too hard. I probably took out a lot more screws than needed to make it happen. I could have just removed the back panel, unscrewed the keyboard-retaining screw (that's the wedged-in-plastic one) and popped the keyboard out from behind/below by aggressively pushing on the proper spot with an eraser-tipped pencil.

I tried that, and it wasn't happening. I knew the keyboard was held in "tight" due to the last time I tried to replace it when I had the wrong part.

So I took out a bunch more screws and then tried again. The extra screws probably didn't need to be removed, but at that point I was more confident in the amount of pressure I was putting on that eraser-tipped pencil to push the keyboard out through the top of the laptop's plastic case.

I got the keyboard out and pulled the ribbon cable.

Inserting the new keyboard's ribbon cable wasn't instant. It took me a couple of minutes to figure out how it snapped in. But I got it done, snapped the keyboard itself into the case and closed everything up.

It all works, and now I have a new keyboard on this laptop that will be 4 years old in a couple of months.

This keyboard isn't a "springy" as the other replacement keyboard I bought a few months back that didn't quite fit, but it'll do the job and give this laptop some more useful life.

My last laptop, a low-priced Lenovo G555, only lasted 2 years before it went to sleep and never woke up. This also-cheap HP Pavilion g6-2210us is still running at nearly 4 years old, but not without effort.

It just underscores my contention that you can't really get 5 years of service out of a laptop. If they don't fail mechanically or electronically, they'll be ancient in some other way. I'm no longer saying "don't pay more than $500 for a laptop," because I see real differences between the $500 and $700-900 laptops being offered these days. But I will say that no matter how much you pay, if you're beating the hell out of it like I do, don't expect more than two trouble-free years.

* Pictured above is the new keyboard before I put it in. After removing the hatch at the bottom of the laptop and removing a retaining screw, there is a little hole on which you can push at the keyboard from below with an eraser-tipped pencil and loosen its plastic grip with the case enough to start unsnapping it the rest of the way around for replacement.